STANDARD VAN
Conveyor Belt
The conveyor belt is available in various lengths and widths. A core advantage of our conveyors is their PATENTED modular design, which allows them to be easily extended or shortened in a few minutes. You can use our configurator to select the specific dimensions of your conveyor as you require.
If you’re unsure which variant is best for you,
contact our specialist by calling: +420 731 829 144
Drive Unit of the Conveyor
The conveyor is fitted with a 0.75 kW electric motor with a worm gear. The voltage of the motor is 230 or 400 V.
The drive unit can safely handle even high loads.
You have a choice of several belt speeds:
220 mm/s 450 mm/s 850 mm/s 1750 mm/s
You can also define your own speed if needed.
Electrical Wiring of the Conveyor
You can choose from four electrical wiring options:
1. Conveyor Belt with 230 V Electrical Wiring
Electrical switch with functions: START, STOP, CENTRAL STOP
Lead to a 230 V socket
2. Conveyor Belt with 400 V Electrical Wiring
Electrical switch with functions: START, STOP, CENTRAL STOP
Lead to a 400 V 16 A socket
3. Conveyor Belt with Speed Regulation – Frequency Converter 400 V
Electrical panel located on a free-standing stand, with smooth speed regulation function.
Functions: START, STOP, CENTRAL STOP, SPEED REGULATION
Lead to a 400 V 16 A socket
4. Conveyor Belt without External Electrical Wiring
This version is used if you want to integrate the conveyor in an existing line which has its own central electrical panel. In that case, the conveyor is only fitted with a 230 V or 400 V electric motor, and the arrangement of the remaining external electrical wiring is left to you.
Protective Side Strips
The conveyor can be fitted with protective side strips. These strips are mounted on the side panels along the full length of the conveyor. They prevent loose material from sliding under the belt. We recommend using these strips with smooth PVC belts or PVC belts with cleats. The strips are not used with a conveyor belt with corrugated sidewalls.
Cover over the Drive Unit of the Conveyor
If the conveyor is used outdoors, it is recommended to fit it with a cover over the drive unit. The cover protects the electric drive, transmission and electrical wiring of the conveyor against weather.
Documentation
The conveyor belt is supplied with documentation in printed and electronic form.
- Pictorial manual for assembly
- Operating manual
- CE Declaration of Conformity*
- Electrical inspection report **
*If the conveyor is supplied without external electrical wiring, the conveyor is supplied with a Declaration of Incorporation of Partly Completed Machinery
**If the conveyor is supplied without external electrical wiring, the electrical inspection report is not included
This conveyor belt, in a unique PATENTED design, is suitable for transporting medium heavy materials. Its modular construction allows the user to choose their own dimensions from 2 to 8 metres in length and 200 or 400 mm in width. The conveyor is available with several types of belts depending on the intended use of the conveyor. The STANDARD VAN conveyor belt is designed primarily for horizontal transport of piece goods and loose materials. We also offer a stainless version of the STANDARD VAN conveyor belt HERE
Uses of the STANDARD VAN conveyor:
* plastic products
* piece goods
* loose material
* waste (plastic, wood, paper)
* sand
* wood
* food products (stainless version of the STANDARD conveyor HERE)
… and many other materials and products
Unsure whether the STANDARD VAN conveyor is suitable for your needs and material?
Call our specialist to discuss which product from our range is best for you.
Tel: +420 731 829 144
The STANDARD VAN conveyor can be fitted with these belts:
Smooth PVC Belt
PVC is suitable for any industrial use.
The belt is smooth, without cleats, and is thus primarily suitable for horizontal transport of piece goods.
The belt is coupled together by a mechanical clip.
| Material | PVC |
| Structure | smooth |
| Cleats | NO |
| Cleat height | – |
| Cleat pitch | – |
| Corrugated sidewall | NO |
| Sidewall height | – |
| Colour | Green |
| Use | Industry, general |
| Recommended belt inclination | Horizontal (max. 5 degrees) |
| Coupling | Mechanical clip |
PVC Belt with 30 mm Cleats
The PVC belt with cleats enables transportation of material at an incline. It is suitable for transporting wood, coal, stone, sand, wood chips, waste and similar material. The belt is coupled together by a mechanical clip.
| Material | PVC |
| Structure | smooth |
| Cleats | YES |
| Cleat height | 30 mm |
| Cleat pitch | ca. 500 mm |
| Corrugated sidewall | NO |
| Sidewall height | – |
| Colour | Green |
| Use | Industry, general |
| Recommended belt inclination | Inclined (max. 35 degrees) |
| Coupling | Mechanical clip |
SBR Belt
A special type of belt designed for higher loads. The belt is textured to increase the adhesion of the transported material. Suitable for outdoor use.
Used primarily for coal, earth, stone, rubble, etc. The belt is coupled together by a mechanical clip.
| Material | SBR |
| Structure | 3-5 mm pattern |
| Cleats | NO |
| Cleat height | – |
| Cleat pitch | – |
| Corrugated sidewall | NO |
| Sidewall height | – |
| Colour | Black |
| Use | Industry, general |
| Recommended belt inclination | Inclined (max. 20 degrees) |
| Coupling | Mechanical clip |
Smooth PVC Belt with a Corrugated Sidewall
The PVC belt with a corrugated sidewall is suitable for transporting loose material.
The sidewalls prevent the material from spilling over the side of the belt.
The belt is not fitted with cleats and is therefore designed for horizontal transport only.
The belt is coupled together by a mechanical clip.
| Material | PVC |
| Structure | smooth |
| Cleats | NO |
| Cleat height | – |
| Cleat pitch | – |
| Corrugated sidewall | Yes |
| Sidewall height | 30 mm |
| Colour | Green |
| Use | Industry, general |
| Recommended belt inclination | Horizontal (max. 5 degrees) |
| Coupling | Mechanical clip |
PVC Belt with 30 mm Cleats and a Corrugated Sidewall
The PVC belt with a corrugated sidewall and cleats is suitable for transporting loose material at an incline. The sidewalls prevent the material from spilling over the side of the belt. The belt is coupled together by a mechanical clip.
| Material | PVC |
| Structure | smooth |
| Cleats | YES |
| Cleat height | 30 mm |
| Cleat pitch | ca. 500 mm |
| Corrugated sidewall | YES |
| Sidewall height | 30 mm |
| Colour | Green |
| Use | Industry, general |
| Recommended belt inclination | Inclined (max. 35 degrees) |
| Coupling | Mechanical clip |
The STANDARD VAN conveyor is fitted with the basic stand version, which allows the conveyor to be used in a horizontal position. The height of the stands is adjustable from 800 to 1000 mm.
The stands are fitted with:
A) Adjustable feet +- 50 mm
B) Swivel casters with a brake
If you wish to install your conveyor belt at an incline, use the STANDARD BELT CONVEYOR FOUND HERE
STANDARD VAN Conveyor 400 mm Wide
| Conveyor length | from 2 to 8 metres |
| Conveyor width | Belt width 400 mm Total conveyor width 550 mm |
| Load-bearing capacity: | 30 kg / m |
| Power: | 0,75 kW |
| Voltage: | 230V or 400V |
| Conveyor weight: | 80 – 170 kg the weight of your specific conveyor assembly is based on the table found here |
| Height with default stands | 800 -1000 mm |
| Belt speed: | 220 mm/s 450 mm/s 850 mm/s 1750 mm/s |
| Surface finish: | Galvanised |
STANDARD VAN Conveyor 200 mm Wide
| Conveyor length | from 2 to 8 metres |
| Conveyor width | Belt width 200 mm Total conveyor width 350 mm |
| Load-bearing capacity: | 15 kg / m |
| Power: | 0,75 kW |
| Voltage: | 230V or 400V |
| Conveyor weight: | 72 – 138 kg the weight of your specific conveyor assembly is based on the table found here |
| Height with default stands | 800 -1000 mm |
| Belt speed: | 220 mm/s 450 mm/s 850 mm/s 1750 mm/s |
| Surface finish: | Galvanised |
Basic Delivery
* The conveyor belt is delivered partially assembled.
* The conveyor is carefully packaged to prevent damage during transport.
* The packaging includes a pictorial manual for assembly.
* Assembling the conveyor takes approximately 2-4 hours (depending on the chosen design)
Package dimensions 1200x 800 x1500 mm
Carrier: DHL
Delivery time: 14 days
Advantages:
* Cheaper
Disadvantages:
* the customer must assemble the machine on their own: 2-4 hours (depending on the chosen design)
Assembled Delivery
If you don’t want to spend time assembling the conveyor belt yourself, we can assemble it for you in our facility before shipping. You can then just plug it into a socket and start working.
Package dimensions (dependent on conveyor dimensions)
Carrier: Solo carrier
Delivery time: 14 to 16 days
Advantages:
* Assembled conveyor
* Properly set and adjusted
* Delivery by solo carrier
* Immediately ready for use after delivery
* Option to pay on delivery
Disadvantages:
* More expensive
How to proceed if you decide to order a conveyor belt through the e-shop:
We’re glad and thankful you decided to order your conveyor belt from us.
Anything unclear?
We’ll describe how your conveyor will be delivered in 10 simple steps – click HERE
Do you have any questions?
You may also like…
-
Replacement ELECTRICAL DRIVE
€ 384 excl. VAT
conveyor STANDARD -
PVC belt with shutters
€ 153 – € 634 excl. VAT
conveyor STANDARD -
Replacement POWER SWITCH
€ 150 excl. VAT
conveyor STANDARD -
Replacement BEARINGS
€ 84 excl. VAT
conveyor STANDARD -
Protective tapes
€ 52 – € 103 excl. VAT
conveyor STANDARD -
PVC smooth belt
€ 110 – € 327 excl. VAT
conveyor STANDARD -
PVC belt SBR
€ 183 – € 832 excl. VAT
conveyor STANDARD
Related products
-
STANDARD
€ 2,633 – € 5,760 excl. VAT
Conveyor Belt -
Belt conveyor
€ 3,390 – € 3,848 excl. VAT
UNIVERSAL -
STANDARD STAINLESS
€ 3,298 – € 7,489 excl. VAT
Conveyor Belt -
PROFI CONCEPT
€ 6,084 excl. VAT
Conveyor Belt
